Username:   Remember Me
Password:  

Uber Articles {Über (ger) adj. above, beyond }

- Above and Beyond a Mere Article Directory

 
 

Solving The Most Common Acrylic Concrete Sealer Complication

By Cathy Mercer

Acrylic concrete sealer has two basic forms namely the solvent and the water based formulations. This is specially useful for project structures that do not demand much effort and costs that are mostly economical. They are applicable both inside and outside surface of the structures for protection of against all types of intrusions. It does not turn yellow which makes it applicable.

There are various applications of concrete sealers. There are exterior surfaces which provide firm protection against the different substances like chlorine or simply water. They can be applied to interior surface for protection and enhancement of color. They are also good to apply in fast projects because they do easily dry within an hour.

Acrylics are much thinner than any other types of sealers and coatings. It is expected that it will wear faster and usually require reapplication after. To give you an idea of what type of acrylics that is good to be used, solvent based is known to perform better and enhances the color than its counter part, the water based.

Additionally, in terms of indoor surfaces, acrylic sealers usually require intense maintenance with series of coats for a floor finish in order to avoid any types of marks. It can be applied easily by using pump up roller or sprayer. It is essential however to put them in thin coats to avoid the problem of fracturing.

To give you an idea of the main problem experienced by various contractors, you need to understand that concrete sealers do have various complications because of the way it is applied. It happens many times that the outcome does not perform as it is in the mind of the contractor. The common reason is over application or multiple coats at a time.

Sealer bubbled is a common term for all contractors. The main reason is again because of over application of the sealers. They will soon turn out to be popped bubbles when they are not given attention immediately. Thin coats must always be done to ensure a high quality concrete sealers and for the surface to look emanating as well.

Bear in mind the appropriate estimation of a coat that should be five mils in thickness when it is wet and absolutely two mils thick when dry. For visual comparison, always compare the thickness of a sheet of copy paper and an ATM card. Do not apply heavy coats because it will certainly leave bubbles on the texture of the surface.

Concrete sealers are usually applied in two thin coats. The first coat will acts like a starter, it will soon disappear on the surface which will surely look unattractive. The second coat will give the finish work, enhancement of color and glow. You must follow the specifications of the manufacturer to successfully do it. Though it will require you to apply more time and to be more patient to apply thin coats instead of just one heavy coat, it is best to follow it.

Bubbling in acrylic concrete sealer can also occur when it is applied during hot weather or if under direct sun. In these conditions, the sealers will dry immediately before all the solvent has evaporated. Again carefully follow the recommendations of the manufacturer regarding the coverage rate. Two thin coats must be done and not a single heavy coat.

You can visit the website www.cascadeconcreteaccessories.com for more helpful information about The Most Common Acrylic Concrete Sealer Problem

Article kindly provided by UberArticles.com

Topics: Home Improvement | Comments Off

Tags: , , ,


Article Citation
MLA Style Citation:
Mercer, Cathy "Solving The Most Common Acrylic Concrete Sealer Complication." Solving The Most Common Acrylic Concrete Sealer Complication. 16 Apr. 2014. uberarticles.com. 29 Dec 2014 <http://uberarticles.com/home-and-family/home-improvement/solving-the-most-common-acrylic-concrete-sealer-complication/>.

APA Style Citation:
Mercer, C (2014, April 16). Solving The Most Common Acrylic Concrete Sealer Complication. Retrieved December 29, 2014, from http://uberarticles.com/home-and-family/home-improvement/solving-the-most-common-acrylic-concrete-sealer-complication/

Chicago Style Citation:
Mercer, Cathy "Solving The Most Common Acrylic Concrete Sealer Complication" uberarticles.com. http://uberarticles.com/home-and-family/home-improvement/solving-the-most-common-acrylic-concrete-sealer-complication/


Reprint Rights

Creative Commons License
This article is subject to a revocable license under a Creative Commons Attribution-No Derivative Works 3.0 Unported License, which means you may freely reprint it, in its entirety, provided you include the author's resource box along with LIVE VISIBLE links (without "nofollow" tags). We may revoke the license at any time with or without cause. You must also include the credit to UberArticles.com.

Comments are closed.

Disclaimer
Uber Articles and its partner sites cannot be held responsible for either the content nor the originality of any articles. If you believe the article has been stolen from you without your permission, please contact us and we will remove it immediately. If you have a problem with the accuracy or otherwise of the content of an article, please contact the author, not us! Also, please remember that any opinions and ideas presented in any of the articles are those of the author and cannot be taken to represent the opinions of Uber Articles. All articles are provided for informational purposes only. None of them should be relied upon for medical, psychological, financial, legal, or other professional advice. If you need professional advice, see a professional. We cannot be held responsible for any use or misuse you make of the articles, nor can we be held responsible for any claims for earnings, cures, or other results that the article might make.
  • RSS Feed

    RSS for Home Improvement