Replace That Old Worn Down Sink With A New One – Plumbing Tutorial | Uber Articles
Username:   Remember Me

Uber Articles {Über (ger) adj. above, beyond }

- Above and Beyond a Mere Article Directory


Replace That Old Worn Down Sink With A New One – Plumbing Tutorial

By Barbara Long

Plumbing is an aspect of home improvement that often comes about without choice. It is important to take care of the plumbing of your property in order to avoid emergency situations and to ensure that you are getting the best from your plumbing system.

When referring to replacing taps it can frequently be more complicated than you will realize initially. Replacing taps can either be needed as part of the installation of a new bath / basin or because your old taps have worn down. You’ll nonetheless, just wish to replace your taps simply on a rather more cosmetic basis.

It’s very important to grasp how many ‘holes ‘ your sink has when it comes to changing your taps. The quantity of holes will resolve whether you can install 2 separate taps or whether you’ll have just the one serving both of your cold and hot wants. If there’s one hole you are prohibited to the one tap and you may need a mono-bloc mixer when talking about replacing your taps. With one hole you’ll have 2 diameter pipes leaving the hole, one for hot and one for cold. It there are nevertheless, 2 holes you can fit 2 separate taps to your sink, giving you a tap for hot water and a tap for cold water.

Ok now you have some basic stuff about what to search for in your pipe work we can move onto the removal of your old taps. The very first thing you want to guarantee you do is to disconnect the water supply and then turn your taps on totally to empty any water left in your system. The way in which you cut off your water supply relies on what kind of water supply you are dealing with. If attached to the mains you must turn off your indoor stop valve. If your hot and cold taps feed off pipes from a cistern you ought to have a gate valve / mini stopcock available to switch off. The stop valve can be discovered next to the cold water tank.

You need to then employ a wrench ( crowsfoot spanner ) or a tap tool to undo the nut, which links the supply pipes to the taps. You may doubtless experience some water coming from the pipes at that point so make sure that you have got a fabric prepared then loosen the nut that’s holding the taps in place and remove them from the sink. You then have got to clean the area the taps fit into as well as replace any old sealing compound.

Before going ahead and fit your new taps you want to compare the pipe connections on the old taps to the new taps. If they’re longer then you’ll need a shank adapter so as to make them fit.

When talking of essentially fitting your new taps you have got to check to confirm if the tails of the new taps are plastic. If not a connector is needed to stop damage. One end of the connector fits onto the tail and the other offers a connection to existing pipes. To fit the taps you need to position the tap in the mounting hole in the basin, making certain that the washers are established between the tap and the sink and when the tap is safely in place the supply pipes can be connected.

When your taps are decisively in place and have been safely hooked up to the pipes you may then turn your water supply back on. Once your water is on you check for any leaks ; if any appear they can typically be determined by tightening your joins.

A home plumbing system is always something to take seriously. Belmont Plumbing and San Francisco Plumbing is ready to come by A house any time and any day. We will be happy to provide you our residential plumbing services. No plumbing problem is too big or too small for us to tackle.

categories: plumbing,plumber,plumbing company,plumbing repairs,backflow,drain cleaning,leak detection,pressure regulators,sewer lines,water heaters,water lines,home repair

Article kindly provided by

Topics: Home and Family | Comments Off

Tags: , , , , , , , , , , , ,

Article Citation
MLA Style Citation:
Long, Barbara "Replace That Old Worn Down Sink With A New One – Plumbing Tutorial." Replace That Old Worn Down Sink With A New One – Plumbing Tutorial. 4 Aug. 2010. 14 Nov 2014 <>.

APA Style Citation:
Long, B (2010, August 4). Replace That Old Worn Down Sink With A New One – Plumbing Tutorial. Retrieved November 14, 2014, from

Chicago Style Citation:
Long, Barbara "Replace That Old Worn Down Sink With A New One – Plumbing Tutorial"

Reprint Rights

Creative Commons License
This article is subject to a revocable license under a Creative Commons Attribution-No Derivative Works 3.0 Unported License, which means you may freely reprint it, in its entirety, provided you include the author's resource box along with LIVE VISIBLE links (without "nofollow" tags). We may revoke the license at any time with or without cause. You must also include the credit to

Comments are closed.

Uber Articles and its partner sites cannot be held responsible for either the content nor the originality of any articles. If you believe the article has been stolen from you without your permission, please contact us and we will remove it immediately. If you have a problem with the accuracy or otherwise of the content of an article, please contact the author, not us! Also, please remember that any opinions and ideas presented in any of the articles are those of the author and cannot be taken to represent the opinions of Uber Articles. All articles are provided for informational purposes only. None of them should be relied upon for medical, psychological, financial, legal, or other professional advice. If you need professional advice, see a professional. We cannot be held responsible for any use or misuse you make of the articles, nor can we be held responsible for any claims for earnings, cures, or other results that the article might make.
  • RSS Feed

    RSS for Home and Family

  • Plugin UAW into your sites and start receiving fresh, unique and niche relevant content today and everyday!